Hong Kong and China OBi Users Group （中港OBi用家论坛）
Peterluger:
i have bought 2 obi110 devices in US, one intend for my family in HK.
1) Do i need any extra service(e.g. google voice)/cost to have both device to talk to each other?
2) Do i need to have both device to setup in US before i bring back?
thanks
RonR:
An OBi straight out of the box at factory defaults will communicate with any other OBi without any configuration or registration. Simply plug a telephone into the PHONE Port, connect the Internet to the Ethernet port, and apply power. Another OBi can then be called by simply dialing : **9 + OBiTALK number.
Peterluger:
dame! I think obi should Point it out "Clearly" on their site!
This device is just "plug and play" and no setup needed for point to point communication!
I always thought i need to create an obi account and google voice acct in order to use this device!
I was plan to get this device for myself to talk to my family in HK; i have bought it since March, but was hesitate to set it up because with all the extra info and feature it list on all different forums and seems it need to setup with all different setting.
It was nice with all extra feature, but for just calling my family with no setup require, it was amazing!
RonR:
On any OBi where the primary or only use is OBi-to-OBi calling, set:
System Management -> Auto Provisioning -> ITSP Provisioning -> Method : Disabled
System Management -> Auto Provisioning -> OBiTALK Provisioning -> Method : Disabled
Physical Interfaces -> PHONE Port -> PrimaryLine : OBiTALK Service
Then you can call another OBi by simply dialing the OBiTALK number. The **9 prefix won't be necessary.
yhfung:
Since each OBi110 comes with a unique 9-digit OBi Number, it could be used for direct dialling without any installation.
You just plug the box, one in Hong Kong and the another in other country with the Interenet connection (connect the Ethernet port to the LAN port of a router with Interent access)
You pick the phone connected to OBi110 PHONE port, press **9 222 222 222 for carrying out a echo test to confirm that your OBi110 could be connect to the OBiNet. After that you are able to make point-to-point call by pressing **9 + <9-digit OBi Number>.
YH
Navigation
[0] Message Index
[#] Next page
[*] Previous page