News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Application Scenario - Hong Kong (OBi110) + Teleworker in China (OBi Apps)

Started by yhfung, March 27, 2011, 12:43:10 AM

Previous topic - Next topic

yhfung

In Figure 1, it is suppose you install an OBi110 in Hong Kong, whose LINE port is connected to the PSTN fixed line and you have to work in the mainland China with a notebook and a mobile phone such as iPhone.



Figure 1: Basic configuration for one OBi110 and OBiAPP/OBiON



Objective 1: Make Hong Kong home phone call from Mainland China with Notebook or iPhone/Andorid Phone

Objectvie 2: Make HK PSTN call from Mainland China with Notebook or iPhone/Andorid Phone


Installation procedures for achieving Objective 1:

As per Figure 1, we follow the information below to set up the system.

Hong Kong OBi110
1) Connect the INTERNET port to the LAN port of an router which is connected to the internet.
2) Connect the PHONE port with an ordinary (corded or cordless) phone.
3) Connect the POWER port with the OBi110 prvided 12V power adaptor

Mainland China with OBiAPP or OBiON
1) Goto the OBiTalk website www.obitalk.com to creat an account for your software devices such as PC
or iPhone/Android phone
2) Install OBiAPP on your PC + Softphone such as X-Lite or Zoiper


How to make phone calls to your HK home?
1) Key the OBiTalk number printed on the bottom of the OBi110 box
   Press <9-digit of HK Home OBi110 number>
2) The phone attached to the PHONE port of the OBi110 will ring
3) If someone at your HK home picks the call, then you are able to talk with him/her.


Installation procedures for achieving Objective 2:

Hong Kong OBi110
1)Connect the LINE port with the fixed line provided by HK Telco company.

Mainland China with OBiAPP or OBiON
1) You have to add the OBi110 to be your "My OBi Endpoints"

How to make HK PSTN calls via HK home's OBi110's PSTN LINE? -- via AA (two-stage dialling method)
1) Key the OBiTalk number printed on the bottom of the OBi110 box
   Press <9-digit of HK Home OBi110 number> OR speed dial number for the OBi110
2) Your call will be directed to the Auto Attendant (AA) of the OBi110
3) You may have the following options:
   Press "1" to continue this call (to the phone connected to the PHONE port of the OBi110)
   Press "2" to make a new call (to HK PSTN via the fixed line connected to the LINE port of the OBi110)
   Press "3" to make call back
4) You press 2 and key the digits that you want to make an HK PSTN call.


How to make HK PSTN calls via HK home's OBi110's PSTN LINE? -- (one-stage dialling method)
1) Press <speed dial number for the OBi110> + <*> + <HK PSTN number>

The one-stage dialling method is an new feature of firmware 1.2 or above.

YH
Hong Kong and China OBi Users Group
www.telecom-cafe.com

tg.voip

Hi YH,

I have the problem that the calling can maintain 1-2 minutes, then disconnect.

My configruation is:
China: Obi110  + local fixed line
Hong Kong: Obi202 + ObiLINE + local fixed line
Macau: Obi202 + ObiLINE + local fixed line
Add each Obi ID into speed dial which can dial 2* phone

Symptom:
China call to HK mobile or Macau mobile, disconnect within 1 minute
HK call to Macau mobile, disconnect within 1-2 minutes