OBi110 making calls with Callcentric
ianobi:
I did say there might be conflicts. If the number you are dialling before the 011 gets prepended matches another rule, then that rule will be used and not the <011>xx. rule.
If you dial eleven digits starting with "1" then 1xxxxxxxxxx will match and that will be sent to CallCentric as it is. If you dial ten digits starting with any number in the range 2 to 9 then <1>[2-9]xxxxxxxxx will match, a "1" will be prepended, then sent to CallCentric.
If you look on the OBi110 web page Status > Call History under "PHONE1" it will show what you dialled after it has been processed by the Phone Port DigitMap. Under "SP2" it will show what went out to line after being processed by the Phone Port OutboundCallRoute.
Let us know the format of the numbers that you are dialling. I'm sure there is an answer :)
Gradius:
I'm just using **2<phone number] w/o 011.
For e.g. if I want to call to Brazil, I would just dial 55<state><phone number> w/o 011. I want to get rid the need of dialing 011, since I'll always use VoIP for overseas calls.
ianobi:
**2<phone number> w/o 011
Is <phone number> eleven digits starting with "1" or ten digits starting with a digit from 2 to 9?
Navigation
[0] Message Index
[*] Previous page