DigitMap and In/Outbound CallRoute Tutorial

<< < (6/6)

ianobi:
Phew! One round to me  8)

Get well soon  :)

QBZappy:
Ian, can I be the next challanger? I'm warming up in my corner. Be careful, I'm sporting the eye of the tiger!

UK vs Canada


It's the Eye of the Tiger
It's the thrill of the fight
Rising up to the challenge of our rival
And the last known survivor
Stalks his prey in the night
And he's watching us all
With the Eye of the Tiger ...

ianobi:
Will we be using Marquess of Queensberry rules or Digit Map Processor rules?  :D

CoalMinerRetired:
Getting back to the tutorial nature of this most interesting thread, I want to add these interrelated points, that I often seem to forget and sometimes have to refer back to, as was the case this evening:

- Occurrences of (Mpli) and pli are substituted internally with the corresponding abbreviated trunk name of the selected primary line.

- You select the Primary Line for the PHONE port and for the AA, respectively, using the parameters PHONE Port::PrimaryLine and Auto Attendant::PrimaryLine.

The list below summarizes the choices available for selection as the primary line:
- SP1 Service
- SP2 Service
- SP3 Service
- SP4 Service
- OBiTALK Service
- PSTN Line1
- Trunk Group 1

Reference: http://www.obihai.com/OBiAdminGuide.htm#_Toc333506039

The possible choices for "named embedded digit maps" are:
o    (Msp1) for SP1 Service::DigitMap
o    (Msp2) for SP2 Service::DigitMap
o    (Msp3) for SP3 Service::DigitMap
o    (Msp4) for SP4 Service::DigitMap
o    (Mpp) for OBiTALK Service::DigitMap
o    (Mli) for LINE Port1::DigitMap
o    (Mph) for PHONE Port::DigitMap
o    (Mph2) for PHONE2 Port::DigitMap
o    (Maa) for Auto Attendant::DigitMap
o    (MtgN) for TrunkGroupN::DigitMap, N=1,2,3,4
o    (MvgN) for VoiceGatewayN::DigitMap, N=1,2,3,4,5,6,7,8

Reference: http://www.obihai.com/OBiAdminGuide.htm#_Toc333506161

Navigation

[0] Message Index

[*] Previous page