New OBi110 Problem

(1/1)

iNickster:
I just received my OBi110 device today, and hooked it up, and all I am getting is a flashing red power LED light, and my router is not recognizing it. What do I do to fix this?

giqcass:
Do a factory reset.
1. With a paper clip (or similar) depress the reset pin located at the bottom of the OBi.
2. While keeping the reset pin depressed, plug-in the power cord.
First, the Power LED will turn red, then become sold green.
Keep depressing the reset pin while this is occurring.
3. After 10 seconds, the Power LED will start to flash green (slowly).
You may now release the reset pin.
4. Within 5 seconds, the Power led will start to flash green rapidly for about 3 seconds.
5. Next the Power LED will change to red briefly indicating the OBi is now rebooting.
The factory reset is now complete.

Navigation

[0] Message Index