Using Bria with Obi100
azrobert:
Quote from: Xelloss on January 24, 2013, 06:20:27 pm
I get what you are saying in your last post but CSipsimple is Android and I am using iOS. I checked Bria and it only allows a prefix so I wasn't about to set a filter. Is there an iOS app I can have do this? Or maybe a way to call my SIP and used the dial out codes?
What you need is a softphone that can dial out WITHOUT registration.
If you find one just set it up to point directly to your OBi just like the CSipSimple example (Server = xx.xx.xx.xx:5061).
In the OBi100 SP2 inboundCallRoute check for the UserID that you used to configure your softphone.
azrobert:
I looked at the Bria user manual and you can turn off registration, but it also says "Typically On, in order to use the account for calls.". It might not let you make calls if turned off.
Xelloss:
I'll check out that setting and see if it changes anything.
Also thank you so much for taking the time to help me! I'm hoping to have a SIP app setup much like Obion is. I can't really rely on Obion which is why I'm trying to figure out ways to get around using it.
Xelloss:
Turning registration off simply changes the status of the account. I'm not afforded any new options so I don't know if it will help.
azrobert:
Quote from: Xelloss on January 24, 2013, 07:39:51 pm
I'll check out that setting and see if it changes anything.
Also thank you so much for taking the time to help me! I'm hoping to have a SIP app setup much like Obion is. I can't really rely on Obion which is why I'm trying to figure out ways to get around using it.
Do you mean like the Android Groove IP APP that connects directly to GV?
The problem with these is either the APP or your OBi100 can receive calls, not both.
I suppose you can keep the APP off until you need to make a call.
Navigation
[0] Message Index
[#] Next page
[*] Previous page