Using Bria with Obi100

<< < (5/5)

azrobert:
Quote from: Xelloss on January 24, 2013, 07:45:27 pm

Turning registration off simply changes the status of the account. I'm not afforded any new options so I don't know if it will help.


You don't need any new options.

Config Bria like this:

Server = xx.xx.xx.xx:5061 (your WAN address)
UserID = anything
Password= anything
Registration OFF

Router:
Port forward 5061 to your OBi100.

Don't do anything on the OBi100 for now.

Make a call.

If it works the phone port on the OBi100 will ring, then change the InboundCallRoute.

Xelloss:
It looks like they force you to register to make calls.

Registration Error
Error 501
Not Implimented

azrobert:
I have a solution for your problem.  I have NOT tested this.
It's a two step process to make the call.

Get a second Sip2Sip account.
Make the account all numeric, so you can call it from a keypad.
Register SP2 on the Second Sip2Sip account.

Change SP2 InboundCallRoute to  {(1st_Sip2Sip_acct):aa}

Change Voice Services => Auto Attendant => Primary Line = SP1

From Bria dial the 2nd Sip2Sip account number.

You should get the OBi100 Auto Attendant.

Follow the prompts to dial the number.

Xelloss:
Awesome, thanks!

Navigation

[0] Message Index

[*] Previous page