On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT
OBi2182
OBi1022
Poly D230
OBi200
OBi202
OBi212
OBiWiFi5G
Started by Digik, January 24, 2013, 05:22:11 PM
QuoteThe OBi power LED is red. What do I do?Do a factory reset. Please refer to this link on how to do a factory reset.Top
QuoteHow do I perform a factory reset?1. With a paper clip (or similar) depress the reset pin located at the bottom of the OBi.2. While keeping the reset pin depressed, plug-in the power cord.First, the Power LED will turn red, then become sold green.Keep depressing the reset pin while this is occurring.3. After 10 seconds, the Power LED will start to flash green (slowly).You may now release the reset pin.4. Within 5 seconds, the Power led will start to flash green rapidly for about 3 seconds.5. Next the Power LED will change to red briefly indicating the OBi is now rebooting.The factory reset is now complete.