Automatic switch between trunks when one becomes unavailable
xibai:
Thanks,ianobi.
I misunderstood hwittenb's last post. It happened quite frequently that callwithus fails with Obi110 while stable with PAP2. it is weird. Also I have incoming call from other callwithus internal numbers.
So anyway to make obi110 knows when sp2 fails and then automatically switch to LINe?
ianobi:
I cannot see a way to make the OBi110 see this route as failed, as registration of the OBi110 is not required, it does not know if anything has failed.
Try to compare settings with the PAP2 and OBi110 to see why OBi110 is less reliable.
If you want to give up on the callwithus via OBi sp2, you could change <**2>86x. to <**8>86x. so making all calls starting with 86 go to the OBi110 Line Port and PAP2 callwithus. This would free up sp2 for another service provider if needed.
xibai:
Thanks, ianobi. You help a lot.
Now I just wonder what is the purpose of trunkgroup if it did not serve automatic switch.
QBZappy:
I think a variation of this set up might work.
Re: e911 Backup/Failover
http://www.obitalk.com/forum/index.php?topic=1832.msg11830#msg11830
ianobi:
xiabi,
I agree, you really do not need a trunk group in this situation. Your original setup is ok for what you need. Use <**2>86x. or <**8>86x. depending on where you want to send "86" calls.
QBZappy,
The problem here is the OBi simply will never know that sp2 has failed, so it cannot "failover" to another trunk.
Navigation
[0] Message Index
[#] Next page
[*] Previous page