Automatic switch between trunks when one becomes unavailable

<< < (6/6)

xibai:
ianobi, I test the trunkgroup as you said. It works with problem. It automatically switch to LINE when I disable SP2.

I went through the post "e911 backup." It looks like a successful setup. The only thing is that it is more complicated than mine. I need to figure out what is need or not in my situation.

Thanks.

ianobi:
Quote

I test the trunkgroup as you said. It works with problem. It automatically switch to LINE when I disable SP2.

I hope that you meant to say "It works with no problem."  :)

It does prove that the trunk group setup works exactly as you want. The problem that you have is getting the OBi110 to think that sp2 is in a "failed" condition when callwithus backs off. I do not have an answer for that problem.

It is well worth reading "e911 backup." We can all learn a lot from that post, as is often the case with any post involving RonR.

xibai:
Ianobi,

It is "without problem". Thanks for all you help. My final configuration is setting up the trunkgroup2 with SP2 going first. But keep SP2 unregistered. PAP2 goes to line.

Thanks for all your help and have a nice weekend.

Navigation

[0] Message Index

[*] Previous page