User defined digit map ipd. Why do I need it?

<< < (2/3) > >>

yhfung:
RonR.

Is there any echo test in term of IPs such that we can use them for testing using IP direct dialling method?

Thanks

YH

RonR:

Quote from: yhfung on March 29, 2011, 04:02:40 pm

Is there any echo test in term of IPs such that we can use them for testing using IP direct dialling method?
I thought this would be an easy question to answer, but in verifying what I was about to say, I think I've discovered some problems with IP dialing in the OBi.

There's an echo test at iNum : 883510000000091@inum.net

Calling this URI from a Voice Gateway (as described here : http://www.obitalk.com/forum/index.php?topic=526.0) works reliably EXCEPT the first time after a reboot.  [The first time, the OBi reports there was no respose from the service provider.]

Calling this URI from a Speed Dial : SP2(883510000000091@inum.net) : works reliably EXCEPT the first time after a reboot as described above.

Calling this URI from a Speed Dial : SP2(883510000000091@91.121.72.17) : fails reliably with the OBi reporting there was no respose from the service provider.

Dialing this URI from the telephone keypad : 883510000000091*91*121*72*17 : fails reliably with the OBi reporting there was no response from the service provider.

Mixed in with the failures are sporadic reboots.

This is with a SIP provider on SP2/ITSPB and PrimaryLine = SP2.

With PrimaryLine = SP1 (Google Voice), IP dialing from the phone keypad is sent to Google Voice.

I also tried changing SIP providers on SIP2/ITSPB, but the results were unchanged.

RonR:
yhfung,

Can you reproduce the failures I described in the previous post?

RonR:
Quote from: RonR on March 29, 2011, 07:05:34 pm

Calling this URI from a Speed Dial : SP2(883510000000091@inum.net) : works reliably EXCEPT the first time after a reboot as described above.

Calling this URI from a Speed Dial : SP2(883510000000091@91.121.72.17) : fails reliably with the OBi reporting there was no respose from the service provider.

Dialing this URI from the telephone keypad : 883510000000091*91*121*72*17 : fails reliably with the OBi reporting there was no response from the service provider.

This is with a SIP provider on SP2/ITSPB and PrimaryLine = SP2.


Obihai Support Team,

Any chance you can see if you can reproduce these failures?

Thanks

RonR:
obi-support2,

Care to comment?

Thanks,
Ron

Navigation

[0] Message Index

[#] Next page

[*] Previous page