News:

On Tuesday September 6th the forum will be down for maintenance from 9:30 PM to 11:59 PM PDT

Main Menu

Obi100 w/dual phone jack

Started by rfgenerator, March 29, 2011, 10:06:44 AM

Previous topic - Next topic

rfgenerator

Hi folks,
Seeing as the availability of the Obi110 is very limited I have ordered an Obi100,  Will I be able to use a RJ11 dual jack to feed both a phone attached to the Obi100 and the house phone wiring?  This is the type of jack I'm talking about http://www.amazon.com/Belkin-RJ11-2-RJ11-Modular-Adapter/dp/B00004Z5KI
Thanks,

RonR

Yes, that should work.  Just make sure your house phone wiring has been disconnected from any other telephone network or equipment.

MichiganTelephone

You might want to visit this page:

How to Distribute VoIP Throughout a Home

Everything you could possibly want to know on the subject (I hope) and then some.  ;D
Inactive, no longer posting or responding to messages.  Goodbye and good luck.  Some of my old Obihai-related blog posts have been moved to http://tech.iprock.com - note this in NOT my blog; I have simply given the owner permission to repost some of my old stuff.