Using OBi Voice Gateways with SIP Providers
Stewart:
Localphone does not permit you to spoof caller ID on a SIP call.
If you want to send your GV number on a Localphone call, you can call from GV via Localphone calling card (requires two-stage dialing) or Local Numbers (to contacts you have set up on Localphone).
For a single contact, you can spoof the caller ID by forwarding your Localphone iNum to the contact, then sending the call to yourlpinum@sip.inum.net, with the desired caller ID.
Voxbeam (another Localphone brand) allows you to send an arbitrary caller ID with each call, though there are some gotchas.
QBZappy:
OBihai,
As you can see by the number of views on this thread a fair number of people have read it. This specialized OBi config would be worthy of a "sticky". I can think of at least two more specialized OBi configs which are also worthy candidates developed by RonR.
RonR,
If we ask politely perhaps some of your setups can be put up as a "sticky". Can you suggest some setups you think are noteworthy. Some of these configs show the flexibility of the OBi device. I would think that this would be a good selling point for the device. I'm not sure if they require your permission, give you the credit or if it is already in the public domain.
Shammi:
Quote from: RonR on March 29, 2011, 01:01:35 pm
Label : ste
DigitMap : (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>xxxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)
where aaa is your local area code.
Hi RonR,
I am using VG3 for LocalPhone to callIndia from Canada. LocalPhone requires the prefix 91 (India country code) before dialling all indian numbers. On the other hand, if I have to call other countries, I have to dial their country codes, e.g. for USA I have to add prefix ’1'
I am following the quoted method for it. My goal is to be able to dial Indian number on LocalPhone VG3 without the prefix 91. If I am correct, the 10 digit number would be dialled as: **3 xxx xxx xxxx
To achieve this can I change :
User defined Digit Map 3> DigitMap > (91xxxxxxxxxx|<91>[1-9]xxxxxxxxx|<91>xxxxxxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)
If this is incorrect, please correct me.
I have two more questions:
1) Can I call call through the VG 3 by using my cell phone that is one of the trusted number on the obi?
2) Can there be a setting that when I call India, I don't need to dial country code prefix 91 (like above); still be able to call other countries using the same vg3. I mean, can vg3 differentiate when I call India dialling **3 + 10 digit Indian number, at the same time next call I can make to USA dialling **3 + 1 + 10 digit number.
thanks in advance
Shammi
Shammi:
Quote from: Shammi on April 20, 2012, 09:22:16 pm
Quote from: RonR on March 29, 2011, 01:01:35 pm
Label : ste
DigitMap : (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>xxxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)
where aaa is your local area code.
Hi RonR,
I am using VG3 for LocalPhone to callIndia from Canada. LocalPhone requires the prefix 91 (India country code) before dialling all indian numbers. On the other hand, if I have to call other countries, I have to dial their country codes, e.g. for USA I have to add prefix ’1'
I am following the quoted method for it. My goal is to be able to dial Indian number on LocalPhone VG3 without the prefix 91. If I am correct, the 10 digit number would be dialled as: **3 xxx xxx xxxx
To achieve this can I change :
User defined Digit Map 3> DigitMap > (91xxxxxxxxxx|<91>[1-9]xxxxxxxxx|<91>xxxxxxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)
If this is incorrect, please correct me.
I have two more questions:
1) Can I call call through the VG 3 by using my cell phone that is one of the trusted number on the obi?
2) Can there be a setting that when I call India, I don't need to dial country code prefix 91 (like above); still be able to call other countries using the same vg3. I mean, can vg3 differentiate when I call India dialling **3 + 10 digit Indian number, at the same time next call I can make to USA dialling **3 + 1 + 10 digit number. If it is not possible, I would prefer the freedom of not adding 91 prefix for indian numbers, and probably make another account for other countries.
thanks in advance
Shammi
RonR:
If you want to use VG3 for calling India only and have 91 automatically prepended to 10-digit numbers:
Voice Gateway3:
Name : LocalPhone
AccessNumber : SPx(LocalPone Proxy Server)
DigitMap : (<91>xxxxxxxxxx|91xxxxxxxxxx)
AuthUserID : LocalPhone_UserID
AuthPassword : LocalPhone_Password
If you want to use VG4 for general international calling where you dial country code + number:
Voice Gateway4:
Name : LocalPhone
AccessNumber : SPx(LocalPone Proxy Server)
DigitMap : (xx.)
AuthUserID : LocalPhone_UserID
AuthPassword : LocalPhone_Password
If you're configuring your OBi with the OBiTALK Web Portal and Circle-of-Trust, the only option for single-stage dialing from an OBiON App is through the PrimaryLine (which cannot be VG3).
Using Single-Stage Dialing Through Any OBi Trunk, OBiON Apps can use any trunk they wish and can have any trunk as their PrimaryLine.
Navigation
[0] Message Index
[#] Next page
[*] Previous page