Using OBi Voice Gateways with SIP Providers
Shammi:
Wow, thanks for simplifying it. You are always at the top of it. Thanks again
Shammi
Shammi:
Quote from: RonR on April 20, 2012, 10:03:23 pm
If you want to use VG3 for calling India only and have 91 automatically prepended to 10-digit numbers:
Voice Gateway3:
Name : LocalPhone
AccessNumber : SPx(LocalPone Proxy Server)
DigitMap : (<91>xxxxxxxxxx)
AuthUserID : LocalPhone_UserID
AuthPassword : LocalPhone_Password
Hi RonR,
I was not successful, it says, "there is no call route available". I triple checked the ID, password and server information. However, the one you suggested for **4 works fine. Thanks. Shammi
RonR:
Shammi,
Sorry 'bout that. The DigitMap should be : (<91>xxxxxxxxxx|91xxxxxxxxxx)
Shammi:
Thanks, RonR. Worked perfect. :)
SIMPLE_desires:
I've been using the ObiTalk.com portal to manage the device. Will these new settings be manageable from the portal or do I need disable portal to manage manually?
Or can I manage manually and set portal to READ ONLY?
Quote from: RonR on March 29, 2011, 01:01:35 pm
Label : ste
DigitMap : (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>xxxxxxx|011xx.|(Mipd)|[^*]@@.'@'@@.)
Please consider adding extra direction to find "user digit maps". Albeit frazzled I did eventually find the setting by opening the "user settings" tree.
Not being familiar entirely with obi_110 I was able to follow the directions otherwise.
[ i ]
I would like MORE VoiceGateways.
(a)
Without buying another device can I have more somehow? I use them to spoof outbound CallerID to match other devices/lines I own.
(b)
Can I have more by daisy chaining OBIs somehow?
[ ii ]
For iNum and SIP broker I'm using the enhanced firmware syntax:
Code:
SP1(sip.inum.net;op=mns)
SP1(sipbroker.com;op=mns)
For SipBroker someone with a high post count suggested changing digitmap to
Code:
(<*>[x*][x*].S4|*[x*][x*].S4)
[ iii ]
I used VG8 but had to change PHY: Phone Port: DigitMap & OutboundCallRoute
The latter was NOT of the form: {(<**N:>(MvgN)):vgN} |N=single digit. It had "li" and some stuff I neglected to retain.
Will using VG8 this way deprive me of other LI functionality?
Navigation
[0] Message Index
[#] Next page
[*] Previous page