Using OBi Voice Gateways with SIP Providers
heny:
This post is very helpful for beginners to setup voice gateway, thanks!
I have a few questions:
1. the post using vg3,4,6,7 as example, I assume I can follow same logic and setup vg1,2,5,8? (for example **0 to route to vg1 etc)
2. the phone port digital map on my obitalk is slightly different than the first post, it is: ([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**9(Mpp)|(Mpli)), where can I find the explanation on each item?
3. one of the posts mentioned "The records in syslog", where can I find the syslog? does it contain all the call logs as well?
thanks
ipse:
Reviving an old topic, but I have a question: when using a VG (my case for 1800 dialing -for free) does Obi use the DTMF settings for SPx?
My setup: SP2 =Anveo, VG3=CallWithUs and VG3 is set to use SP2.
I am having problems passing DTMF tones AFTER I get connected (conf bridge) and I'm guessing if I make changes to SP2 DTMF settings it won't matter anyways.
I have another VG6 set up with tollfree and that one seems to be working much better (less than 5% errors) - so I'm afraid this just boils down to CWU performance.
Anyone else having trouble with CWU and DTMF? Could this be specific to the use of a VG instead of SP?
/EDIT I have the same issue with IPKall and toll free calls. Like I said, tollfreegateway works almost perfect - they all hand off SP2.
/EDIT2 I take back what I posted before: making DTMF changes for ITSP B (Anveo) DOES improve DTMF sending...I have it set to Inband now and digit success rate is close to 100%. I would not have guessed that params from SPx are actually used by VGs as a "fake" SIP account can also be used.
I toggle between Inband and RFC2833 and I see the difference immediately.
ob1joef:
OBi200 and Voice Gateways : Issues??
Once upon a time I had an OBi110 and I successfully installed working Voice Gateways on it.
I followed the instructions on the OBi web forum for an OBi110 (above).
I repeated those instructions in that ...
I tried replicating the VGs on an OBi200 and keep getting "No service configured" error.
I've gone over my work many times for syntax errors, etc.
I am trying to have a callcentric dial out
I tried @srv.callcentric.com that I've successfully used with a SP3102
and tried stun.callcentric.com, too.
But I'm failing before it can get to calling out to Callcentric. So I'm lost.
Anybody know of issues with Voice Gateways moving from an OBi110 and an OBi200?
thanks in advance
Joe F
drgeoff:
@ob1joef
Please do not post the same content more than once or in separate topics. http://www.obitalk.com/forum/index.php?topic=16015.msg99604#msg99604
ob1joef:
Using my OBi200 with the latest fw 3.2.2 (Build: 5921EX) on HV 1.4
I've followed the directions to the letter at the top of this post to implement VG
and always get:
"No service configured error"
"Please log into OBiTalk and configure your device"
SP1-4 work fine using Google Voice and Callcentric
but trying to use a Voice Gateway with a working Callcentric account
gets me this error.
Original HW & PTS warranty ended Jul 2018 so I paid for a year of Premium Tech Support
but have not heard from them in 10 days.
Any more suggestions?
Can anyone confirm that THEY are using Voice Gateway on an OBi200???
thanks,
Joe f
Navigation
[0] Message Index
[#] Next page
[*] Previous page