Quote from: neftv on March 29, 2011, 08:23:10 PM
Since Voip Provider A is my main provider I would not need to do anything special dialing out my 10 digit numbers for domestic calls, however can I have an outbound routing rule so that whenever the 011 is seen it goes out Voip provider B?
Yes, it's a trivial change.
Default ITSPA DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|
011xx.|xx.|(Mipd)|[^*]@@.)
Modified ITSPA DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|
<**2>011xx.|xx.|(Mipd)|[^*]@@.)
By default, 911 goes out the LINE Port. Making 911 go out SP1 instead is also a minor change.
Default PHONE Port OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},
{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Modified PHONE Port OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},
{911:sp1},{(<#:>):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},
{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}