Voice Gateway Setup
ArbitaryTwist:
Quote from: azrobert on February 22, 2013, 08:30:33 am
You are not following my example in Reply #11. You have a conflicting definition in your configuration that nobody can see. That is why I removed the "**3" from your ITSP DigitMap and moved the rules to the beginning of your Phone DigitMap and OutboundCallRoute.
Edit:
Dial 0081xxxxx, not **30081xxxxx
Edit2:
What is your Phone Port Primary Line set to?
Tried your setup, and still no go. Same error. I did dial 0091xxx.
Primary Line is set to SP1
azrobert:
I defined Speed Dial #18 as:
sp1(0081123456789@sip.voipjumper.com;ui=UserID:password)
I dialed 18#. The call went out SP1 and I received a response (403 Forbidden). This is what I expected because I don't have an account at VOIP Jumper.
Can you try using a Speed Dial just to see if it works. The Speed Dial will bypass any DigitMap or OutboundCallRoute processing.
ArbitaryTwist:
Quote from: azrobert on February 22, 2013, 12:21:47 pm
I defined Speed Dial #18 as:
sp1(0081123456789@sip.voipjumper.com;ui=UserID:password)
I dialed 18#. The call went out SP1 and I received a response (403 Forbidden). This is what I expected because I don't have an account at VOIP Jumper.
Can you try using a Speed Dial just to see if it works. The Speed Dial will bypass any DigitMap or OutboundCallRoute processing.
Well that works. Call went out as 0091xxxxxxxxx@sip.voipjumper.com through SP1 in call history
azrobert:
This proves sp1 is functioning. Did the call connect to the number you dialed?
Now try a Speed Dial defined as:
vg3(0091123456789)
ArbitaryTwist:
Quote from: azrobert on February 22, 2013, 12:52:40 pm
This proves sp1 is functioning. Did the call connect to the number you dialed?
Now try a Speed Dial defined as:
vg3(0091123456789)
Yes the call did go through. I just reset the OBI and adding it back to the Obi Dashboard.
EDIT:
Ok i went and reset the OBI and went back to my initial post settings and things seem to be working. I had done this once before too, but had the same problem. Really odd, but will let it run for bit to see how it works.
Only thing i want to add that is different from the last reset is, that i setup VG3 before Google Voice on SP2, but that shouldn't really matter.
Appreciate the help guys. Learning new tricks as you helped me troubleshoot it.
Again special thanks to Azrobert and Ianobi.
Navigation
[0] Message Index
[#] Next page
[*] Previous page