Voice Gateway Setup
zapattack:
My full reset unsuccessful because I forgot to delete it from dashboard. Even pushing the button with power off/on does not delete all settings (?) and I have all provisioning disabled.
Still have same delay with speed dial (**3NNNNNNNNNN) to local number.
Takes about 4 seconds before Call Status shows Terminal 2 info, then another 5-6 seconds to complete.
Need another non-register type of provider to prove anything.
ianobi:
Speed dial **3NNNNNNNNNN is not the same as using trunk format vgX(2345678901).
**3NNNNNNNNNN is the same as dialling from the Phone Port. It gets processed by the Phone Port DigitMap and Phone Port OutboundCallRoute. Trunk format vgX(2345678901) goes straight to trunk with no processing.
zapattack:
Sorry, meant VG3(NNN was no different than (**3NN for time to complete.
Longest delay is still after Call Status shows full sip address in Terminal 2 column.
Maybe Obi messages not properly handled by VoIP provider?
ianobi:
It does look like a voip provider problem. I've just tried various providers on my voice gateways - sip2sip, sipbroker, qxip - they all seem to connect without any measurable delay.
A few comments about voice gateways:
Trunk format vg6(2345678901) is super-fast. It does not refer to any digit map, not even its own. This is a good way to send out numbers that maybe you want banned from normal use via the Phone Port - maybe some sort of parental control? It's also a good way to test for delays outside of the OBi as the number is sent out with no processing delays. The vgX does not even have to be referred to in the Phone Port DigitMap or OutboundCallRoute if you only want to use it via speed dials. The downside of trunk format is that it only works from speed dials (or when used in call-forwarding etc) from the OBi device it will not work via OBiON or OBiAPP.
Number format **62345678901 is a little slower and will be processed through the Phone Port DigitMap (Mvg6 in this case) and the Phone Port OutboundCallRoute. The upsides are it can be dialled from the Phone Port, auto attendant or via speed dials. The digit maps are used so number transformation can be used.
Navigation
[0] Message Index
[*] Previous page