Voice Gateway Setup
ArbitaryTwist:
Anyone?
ianobi:
Please confirm this setting:
Physical Interfaces > PHONE Port > PrimaryLine
What happens if you dial numbers such as **3011xx… and **300xx…
Check in your local web page Status > Call History. Web page address can be found by dialling ***1.
Quote
When i dial out it says "No Service Configured Error. Please logon to Obitalk.com........."
What were you dialling when this happened?
ArbitaryTwist:
Primary Line is set to SP1
When i dial **3011xxx or 011xxx it says "No Service Configured Error. Please log onto obitalk.com ....."
Nothing shows up in the call history. If i make a call through SP1 or GV, it goes through fine and shows up in the call history.
EDIT: So i setup VOIP Jumper on SP2 and everything is working well. I am not sure if VOIPJumper requires registration, but they won't answer that question. All i get back is to use the website settings.
https://www.voipjumper.com/sip
I would like to use it as VG3, so i can keep Google Voice.
azrobert:
Un-register VOIP Jumper using your working setup on SP2.
Voice Services => SP2 service: X_RegisterEnable = unchecked
This will tell you if they accept un-registered outbound calls.
azrobert:
There is a solution if they don't accept un-registered outbound calls.
Get a free PBXes.org account.
Define Freephoneline.ca and VOIP Jumper as trunks on PBXes.
Register SP1 as an extension on PBXes.
Navigation
[0] Message Index
[#] Next page
[*] Previous page