Help Using Google Voice + Simon Telephonics as Gateway for Outgoing Calls

(1/4) > >>

Romeu:
Hi there!
How are you guys!?

I have two Google Voice numbers and I would like to use one with Simon Telephonics as my Voice Gateway3 for Outgoing Calls.

I followed RonR's post: https://www.obitalk.com/forum/index.php?topic=526.40 but I can't make it work...

Everytime I try to place a call I receive a message (male voice) saying: "the number you dialled **3xxxxxxxxxxx was rejected by the service provider, reason is 400."

When I configure it using the same Simon Telephonics credentials but as a SPx it works perfectly!

My settings are:

SP1= Brazilian SIP Provider called Vono [Primary Line]
SP2= Google Voice (with Simon Telephonics) - This is not the same GV I am trying to setup as my Voice Gateway3

Gateway3
Name: Simon
AccessNumber: sp1(vono.net.br) - Do I need do add the port here? Like: vono.net.br:5060 ?
DigiMap: (xx.)
AuthUserID: GVxxxxxxxxxxx@gvgw3.simonics.com - Do I need to add the port here?
AuthPassword:************

- Physical Interfaces - PHONE::DigiMap=([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**8(Mli)|**9(Mpp)|(Mpli))

- Physical Interfaces - PHONE::OutboundCallRoute={([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}


I would appreciate some help from you guys who have had success in using Google Voice with Simon Telephonics as VoiceGateway.

Thank you very much and a happy thursday for everyone!
Romeu.

lhm.:
Try here.

http://michigantelephone.wordpress.com/2012/04/15/how-to-use-the-simon-telephonics-google-voice-gateway-with-an-obihai-device-to-provide-caller-id-name-on-incoming-google-voice-calls/

RFord:
It should be:

Change this:

AccessNumber: (vono.net.br)

To:

AccessNumber: sp1(sip.gvgw3.simonics.com)

You need to reference your sip provider (sp1 in this case).

or

try this if the above doesn't work:

AccessNumber: sp1(gvgw3.simonics.com)

Again, does Simon Telephonics allow outgoing calls without registration?  This is key....

Romeu:
Quote from: lhm. on February 21, 2013, 01:28:10 pm

Try here.

http://michigantelephone.wordpress.com/2012/04/15/how-to-use-the-simon-telephonics-google-voice-gateway-with-an-obihai-device-to-provide-caller-id-name-on-incoming-google-voice-calls/


Hi lhm.!

I had read the article you mentioned before, but unfortunately it only teaches how to configure the Service Providers (SPx) but does not explain how to configure the Voice Gateways (vgx) with Simon Telephonics service for outbound calling.

Anyway thank you for your help! :)

zapattack:
What does Call History show?
Did the call reference SP1 on the way to the VG Dial Map?
If it attempted to connect, what digits did it dial, if any?

Navigation

[0] Message Index

[#] Next page