Help Using Google Voice + Simon Telephonics as Gateway for Outgoing Calls
Romeu:
Quote from: RFord on February 21, 2013, 04:57:11 pm
It should be:
Change this:
AccessNumber: (vono.net.br)
To:
AccessNumber: sp1(sip.gvgw3.simonics.com)
You need to reference your sip provider (sp1 in this case).
or
try this if the above doesn't work:
AccessNumber: sp1(gvgw3.simonics.com)
Again, does Simon Telephonics allow outgoing calls without registration? This is key....
Hi RFord!
Thank you for your Help.
Reviewing RonR's post I could understand my mistake.
I made the changes you suggested me.
So, when I use AccessNumber: sp1(sip.gvgw3.simonics.com) I received a messege saying: "the number you
dialled **3xxxxxxxxxxx has not received a response from service provider."
And when a use AccessNumber: sp1(gvgw3.simonics.com) I received a messege saying: "the number you
dialled **3xxxxxxxxxxx was rejected by the service provider, reason is 401."
Quote from: zapattack on February 21, 2013, 10:39:23 pm
What does Call History show?
Did the call reference SP1 on the way to the VG Dial Map?
If it attempted to connect, what digits did it dial, if any?
Hi zapattack!
How are you?!
This is my the Call History:
Call 1
Terminal ID
Peer Name
Peer Number
Direction
13:59:31
13:59:31
----------Call 2
Terminal ID
Peer Name
Peer Number
Direction
13:57:40
13:57:41
02/22/2013 13:59:31
PHONE1
**3xxxxxxxxxxx
Outbound
New Call
-------------------02/22/2013 13:57:40
PHONE1
**3xxxxxxxxxxx
Outbound
New Call
SP1
xxxxxxxxxxx@sip.gvgw3.simonics.com
Outbound
End Call
------------------
SP1
xxxxxxxxxxx@gvgw3.simonics.com
Outbound
End Call (401 Unauthorized)
Any idea?
Thank you again guys! =)
RFord:
The proper Voice gateway setup should be:
Gateway3
Name: Simon
AccessNumber: sp1(sip.gvgw3.simonics.com) or [ sp1(gvgw3.simonics.com) : should be the former ]
DigiMap: (xx.)
AuthUserID: GV1xxxxxxxxxx (GV+1+10 digits)
AuthPassword:************
If that doesn't work, setup Simon Telephonics on SP1 and let it registered to the server. make an outgoing test call to make sure it works. After confirming, disable SP1 by unchecking "Enable" box associated with SP1 and Save/Reboot the OBi box. It should de-register. Now place an outgoing call again. If the call is successful, you are able to make outgoing calls without registration to Simon Telephonics server. If the call fails, you cannot and as such, you cannot use the Voice Gateways with Simon Telephonics. Simon Telephonics is using some type of PBX-type setup and it might not allow calls via it Server without registration to said Server. The test above will determine that. Please note correct AuthUser format (GV plus 11-digit telephone number)!
zapattack:
The 1 second calls indicate connection to simonics, but obviously no successful login.
UserID and Password look like the problem.
Copy and paste the password if possible.
Good idea trying the SP setup route. Keep in mind it may take a few minutes for registration to expire.
However, I suggest you use X_RegisterEnable under Voice Services/SP1/SP1 service parameter to disable registration.
Unchecking means only OGoing registration is stopped.
Romeu:
Quote from: RFord on February 22, 2013, 05:09:30 pm
The proper Voice gateway setup should be:
Gateway3
Name: Simon
AccessNumber: sp1(sip.gvgw3.simonics.com) or [ sp1(gvgw3.simonics.com) : should be the former ]
DigiMap: (xx.)
AuthUserID: GV1xxxxxxxxxx (GV+1+10 digits)
AuthPassword:************
If that doesn't work, setup Simon Telephonics on SP1 and let it registered to the server. make an outgoing test call to make sure it works. After confirming, disable SP1 by unchecking "Enable" box associated with SP1 and Save/Reboot the OBi box. It should de-register. Now place an outgoing call again. If the call is successful, you are able to make outgoing calls without registration to Simon Telephonics server. If the call fails, you cannot and as such, you cannot use the Voice Gateways with Simon Telephonics. Simon Telephonics is using some type of PBX-type setup and it might not allow calls via it Server without registration to said Server. The test above will determine that. Please note correct AuthUser format (GV plus 11-digit telephone number)!
Hi RFord!
Let's see if I understand this correctly.
I deleted the information from VoiceGateway3 (I guess it does not matter).
I configured Simon on SP1 (with the same login and password previously used in VoiceGateway3), all worked perfectly making and receiving calls.
After That, I disabled SP1 by unchecking "Enable" box Associated with SP1 and Saved / Reboot the Obi box, but when I try to place a call I received a message (male voice) saying: "No service configured, please log in to obitalk.com and cofigure your device".
thank you for your generosity in wanting to help me.
Quote from: zapattack on February 22, 2013, 10:40:27 pm
The 1 second calls indicate connection to simonics, but obviously no successful login.
UserID and Password look like the problem.
Copy and paste the password if possible.
Good idea trying the SP setup route. Keep in mind it may take a few minutes for registration to expire.
However, I suggest you use X_RegisterEnable under Voice Services/SP1/SP1 service parameter to disable registration.
Unchecking means only OGoing registration is stopped.
Hi zapattack!
Thank you for your replay!
The login and the password are just fine, 'cause as I said above, I can register on SP1 or SP2 with them and place and receive call.
The X_RegisterEnable under Voice Services/SP1/SP1 service was enabled all the time by default. Is this what you suggested?
Thank you again!
RFord:
Romeu:
It appears from the test you did that Registration is required for outgoing calls (and incoming) with Simon Telephonics. This would explain the problems you are having with Voice Gateway setup, which only works with servers which do not require direct registration!
Maybe you can shoot an email to operator of Simon to confirm and also to solicit if there is some form of work around using an intermediate provider.
Navigation
[0] Message Index
[#] Next page
[*] Previous page