Is there a way to insert a pause in speed dial?

[Azouz]

Hello!
Is there a way to insert a pause in speed dial?
So far I have tried S1, P, W and none of them seems to work!
This is an example: **218009897676S1777 where 18009897676 is the number i'm trying to call then S1 wait for 1 second 1777 is the pin number.

[azrobert]

The OBi by itself will not allow pauses.
There is a way using the OBi with a free account at Tropo.com to dial with pauses.
See:
http://www.obitalk.com/forum/index.php?topic=5310.0

To call with a speed dial:
sp2(9991234567@sip.tropo.com;ui=8009897676*1777)
9991234567 is your Tropo app number.

If the pause is not long enough add 1 or more asterisks.

I did not spend a lot of time developing this app and it has no error checking.

Edit:
I corrected an error in my speed dial example.
The called number must be 10 digits, not 11.

[giqcass]

I have had an idea about an internal OBi hack that might work but I have not tried it.  I was thinking that it might be possible to replace an AA prompt with a pre recorded DTMF pin number or extension number and then bridge the AA prompt with the outgoing call. 

[Azouz]

Gigcass,
I tried that before, it didn't work.

[giqcass]

It was a good thought.  lol. 
I would be interested in how you were going about it.

[azrobert]

I have a new version of my app. I added some error checking and the OBi bridges the call.

See:
http://www.obitalk.com/forum/index.php?topic=5310.0