Simple 911 Redirection

<< < (2/2)

giqcass:
Plus 1 for this request.  The solution should be simple to implement and bypass all other digit maps.

I would like to add the following to the request.  It would be nice to be able to add backup dialing routes as well.  I can see people want to be helpful so I will post this solution for what I'm requesting before someone else does.

Quote from: ianobi on November 13, 2013, 07:29:07 am

The only way that I know to do this is by using Trunk Groups. If you set up Trunk Group 1 to be "sp2,sp1" and made Trunk Group 1 your Primary Line, then in theory if sp2 is unavailable, then calls would failover to sp1.

The problem here is that the OBi needs to know that sp2 is unavailable. If both of sp2's sessions are in use, then sp2 is unavailable because it is busy and calls would failover to sp1. This is a useful scenario if there's a lot of calls going on at the same time.

If you are looking at a failover in fault conditions, then the OBi only knows there is a problem on sp2 if registration fails and this can take quite a few minutes depending on the interval set for registration requests. Also, some faults will not call a registration failure.

Have a search around the forum for "Trunk Groups". RonR posted some interesting info about them.

I do use Trunk Groups and find them very useful in some circumstances.


Yeah that is basically what I'm talking about but simplified for 911 use.

dircom:
yes, Reply #2 would be a nice feature

Navigation

[0] Message Index

[*] Previous page