Configure Service provider 2 for Nymgo

(1/2) > >>

avdraa:
Hi Friends,
I tried to configure Nymgo for Obihai 110 with all possible options, including expert. But did not work.

Hence can anyone please let me know, how to configure Nymgo.

Nymgo has provided the following details
http://www.nymgo.com/sip-settings.php

Thanks in advance.

RonR:
Assuming you want to use Nymgo on SP1/ITSPA, the following minimal configuration should get it going.  You might want to start from factory default settings.


ITSPA -> General -> STUNEnable : (checked)

ITSPA -> General -> STUNServer : stun.nymgo.com

ITSPA -> General -> X_STUNServerPort : 80

ITSPA -> SIP -> ProxyServer : ata.nymgo.com

ITSPA -> SIP -> RegistrationPeriod : 3600

SP1 -> AuthUserName : nymgo username

SP1 -> AuthPassword : nymgo password

Phone Port -> PrimaryLine : SP1 Service

avdraa:
Thanks RonR,
I got this resolved from Obitalk Support.

Just for information.
I had problem with my Wireless router.
Where I had to disable "NAT Filtering" "Disable SIP ALG" -> TRUE

After this started working

RonR:
Thanks for the update.

abcc05:
Hi,
I have been trying make call using Nymgo but it is not working. It's showing up as "Registered" in OBItalk as service 2. Not able to make call even if I configure this as primary.

Not sure where should I make following configuration, I do not see any option in OBITALK web portal :

TSPA -> General -> STUNEnable : (checked)

ITSPA -> General -> STUNServer : stun.nymgo.com

ITSPA -> General -> X_STUNServerPort : 80

ITSPA -> SIP -> ProxyServer : ata.nymgo.com

ITSPA -> SIP -> RegistrationPeriod : 3600

SP1 -> AuthUserName : nymgo username

SP1 -> AuthPassword : nymgo password

Please help. Thank you for your time.

Navigation

[0] Message Index

[#] Next page