Configure Service provider 2 for Nymgo

[avdraa]

Hi Friends,
I tried to configure Nymgo for Obihai 110 with all possible options, including expert. But did not work.

Hence can anyone please let me know, how to configure Nymgo.

Nymgo has provided the following details
http://www.nymgo.com/sip-settings.php

Thanks in advance.

[RonR]

Assuming you want to use Nymgo on SP1/ITSPA, the following minimal configuration should get it going.  You might want to start from factory default settings.


ITSPA -> General -> STUNEnable : (checked)

ITSPA -> General -> STUNServer : stun.nymgo.com

ITSPA -> General -> X_STUNServerPort : 80

ITSPA -> SIP -> ProxyServer : ata.nymgo.com

ITSPA -> SIP -> RegistrationPeriod : 3600

SP1 -> AuthUserName : nymgo username

SP1 -> AuthPassword : nymgo password

Phone Port -> PrimaryLine : SP1 Service

[avdraa]

Thanks RonR,
I got this resolved from Obitalk Support.

Just for information.
I had problem with my Wireless router.
Where I had to disable "NAT Filtering" "Disable SIP ALG" -> TRUE

After this started working

[RonR]

Thanks for the update.

[abcc05]

Hi,
I have been trying make call using Nymgo but it is not working. It's showing up as "Registered" in OBItalk as service 2. Not able to make call even if I configure this as primary.

Not sure where should I make following configuration, I do not see any option in OBITALK web portal :

TSPA -> General -> STUNEnable : (checked)

ITSPA -> General -> STUNServer : stun.nymgo.com

ITSPA -> General -> X_STUNServerPort : 80

ITSPA -> SIP -> ProxyServer : ata.nymgo.com

ITSPA -> SIP -> RegistrationPeriod : 3600

SP1 -> AuthUserName : nymgo username

SP1 -> AuthPassword : nymgo password

Please help. Thank you for your time.

[obi-support2]

abcc05,

Try disabling STUN. That is, uncheck the box STUNEnable.

NOTE: You stun server/port does not seem correct. But you might not even need STUN anyway.

[RonR]

abcc05,

stun.nymgo.com is not working even at the correct port of 3478.

stun.ideasip.com is a working STUN server.  Leave the port set at the Default value of 3478.

(You can use any STUN server - it does not have to be your ITSP's.)

[abcc05]

I did that but still not working. Looks like I am missing something really basic setting.

[RonR]

How is the call failing?

What (if anything) shows up in Call Status immediately after pressing #?

What (if anything) show up in Call History?

Please describe in gory detail how it's not working.