Invoke Second Dial Tone in Digit Map

(1/3) > >>

RonR:
From page 121 of the OBi Device Administration Guide (Version 23.03.11: 23 March 2011):

=====
Invoke Second Dial Tone in Digit Map

You can tell OBi to start a tone after a certain pattern of digits have been dialed by specifying the element {t=<tone>} within a digit map, where <tone> is a 1 to 3-letter name of the tone to play. The tone will stop when the next digit is entered.

For example:

(**1{t=di2}(Msp)|**8{t=od}(Mli))

which tells the device to play Second Dial Tone when **1 is dialed, or play Outside Dial Tone when **8 is dialed.
=====

Is this actually implemented in v1.2.0 (Build: 2102)?  I put this example (using Msp1) in the PHONE Port DigitMap and no new dialtone was started after **1 or **8 was dialed.  This is a feature I really like and use frequently in the PAP2.

Am I missing something?

RonR:
A response from Obihai would be greatly appreciated.

obi-support2:
Yes. Problem reproducible. This feature is broken in 1.2.
We should be able to fix this in the next f/w posting.
Thank you for reporting the issue.

RonR:
This problem appears to be fixed in 1.2.1 (Build: 2103).

Thank you.

jimates:
RonR,

does it matter at what point in the Phone Port DigitMap the additional items are put.

i want to add this
(**2{t=di2}(Msp)|**8{t=od}(Mli))

my current digitmap
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|411|**0|***|#|**1(Msp1)|**2(Msp2)|**8(Mli)|**9(Mpp)|(Mpli))

Navigation

[0] Message Index

[#] Next page