Two lines with splitter?

<< < (2/2)

giqcass:
What you have described is how I have set up my wiring.  I have my OBi202 with the house wiring plugged into line one.  The main phone is line one.  I only need the splitters in the rooms that I want to use line two.

I'm using this splitter.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Delectronics&field-keywords=Steren+4-Conductor+2-Line+Split+Adapter+%28300-324%29

This setup does require you to check your wiring of course.

azrobert:
This is the type of wall plate I used.

http://www.ebay.com/itm/DUAL-RJ11-PHONE-JACK-4-CONDUCTOR-CAT3-TELEPHONE-PHONE-WALLPLATE-WHITE-BRAND-NEW-/170726597415?pt=US_Phone_Cords_Jacks_Plugs&hash=item27c0192327

Shale:
Azrobert's wall plate looks good, and it will be more elegant that an adapter if that fits the installation. It is often easy to rewire an existing wall plate or connect as well to maybe swap the pairs.

If you are ever wiring for somebody who might be putting in a jack where might be putting in wiring for an emergency pendent or alarm system, look into an RJ-45 jack with appropriate wiring. Wiring is more complex, but it allows the device to call out on a line despite a phone being off hook.

giqcass:
I was thinking about replacing the wall plate with one of the two line plates myself but the adapter was cheap and easy.  Since I only wanted to use the second line in my daughters room laziness won lol.

Navigation

[0] Message Index

[*] Previous page