AA making a new call

(1/1)

dudlee:
When I call my obi110 I get the AA.  I then press 2 and dial a new number and press #.  I just get silence.  I had the pin enabled and would put in the pin and press # and get the same silence, so I took the pin out.  Still unable to make a call out from the obi110 using the AA.  I do have the number I am calling with in the COT. I assume I have something set up incorrectly as the device so far has worked perfect except the pressing 2 on the AA.  When I press 1 it does connect the call as normal.  Calling out from the phone on the obi is completely normal

RonR:
Does the number you wish to dial through the AA go out successfully if you force it to the intended port with the appropriate **n prefix?  If so, check the AA -> PrimaryLine setting.  By default, the AA uses the PSTN Port.

Navigation

[0] Message Index