Remote access = blank config pages on OBi100!!!

(1/3) > >>

aczu:
When I access my OBi100 remotely, all the configuration pages on the right are completely blank (i.e. white, no text, nothing!!)  Local access within the LAN works fine.

I see Setup Wizard, Status, System Management, etc. in the left pane.  Clicking on any of those reveals the sub-menu, but clicking on any of the specific sub-menu items like SP1 Service, SIP, RTP, etc. does not display the corresponding configuration options on the right side of the page.  There is no text displayed whatsoever on the right side of the page.

The ONLY exception to this is the Call Status, Call History and Device Update.  These display properly.

The OBi is behind a Linksys WRT54GL router running Tomato, with port-forwarding on as follows.


On   Proto   Src Address   Ext Ports   Int Port   Int Address     Description
On   TCP                   80                     192.168.2.100   OBi100 web admin


The OBi has the latest published firmware 1.3.0-2774 installed.

Any suggestions or advice to get remote access working or is this a known issue?

QBZappy:
aczu,

Welcome,

Every once in a while there seems to be a browser compatibility issue. You may need to try another browser in the mean time.

Shale:
I suggest that you try a different browser.

aczu:
Thanks for the suggestions.

I was using Chromium 25.  Chrome 26 also displayed blank pages  Iceweasel 10 displayed error messages, typically an XML Parsing error.  I'll keep trying  :)

Shale:
Quote from: aczu on March 28, 2013, 08:18:26 pm

Thanks for the suggestions.

I was using Chromium 25.  Chrome 26 also displayed blank pages  Iceweasel 10 displayed error messages, typically an XML Parsing error.  I'll keep trying  :)


Well,I guess that covers a spectrum of browsers, but maybe you could try Firefox or IE also.

Navigation

[0] Message Index

[#] Next page