Obi110 and Obi202 on same network.

(1/3) > >>

mrnaughty:
If I have Obi110 hookup to PSTN line and and
2 SIP accounts, enabled one of them GVoice and I hookup to WI-FI with WI-FI adapter Obi202 with 4 SIP accounts enabled AND one of them GVoice but different GV# from Obi110 setup... will it work?
PS: Obi110 and Obi202 with all sip accounts enabled and both devices have Google Voice enabled but different #'s,.. will it work???:

Felix:
Yes.

mrnaughty:
Quote from: Felix on March 31, 2013, 10:35:33 am

Yes.


Thank you.I was not sure, as I read somewhere if you have more then 1 device running with default 5060 port it will have problems.

Felix:
Well, you don't have to run both devices on the same ports. But I wouldn't change anything unless you actually have the problem. I have two VoIP devices at home all the time (OBi202 and IP phone from work); and on a regular basis I have another OBi that I am setting up from somebody else, or PBX that is up and running. Just having all that on a network never caused a problem

VOIPisGreat:
Can you use just one phone port to access both devices?

For example, having the phone connected to just the obi202, can I make and receive calls from the obi110?

If so, how do I configure the dial plan and the inbound call route to achieve that? Thank you.

Navigation

[0] Message Index

[#] Next page