Outbound International calls via SP2

<< < (3/4) > >>

faris98:
I will try {(<011:>xx.):sp2
and let you know

faris98:
Same result. I'm getting this int he Obi history (400 Content-Length mis-match)
No history in the service provider's website.

azrobert:
Have you used CallWithUs with another device?

Can you post how you defined CallWithUs on SP2.

azrobert:
Your config should look like this:

ISTP Profile B ==> SIP

ProxyServer: sip.callwithus.com

Voice Services ==> SP2 Service

X_ServProvProfile: B
AuthUserName: Your_UID
AuthPassword: Your_PW

hwittenb:
Just to support Azrobert, I have Callwithus setup to register on SP2 and Azrobert's initial posting {(011xx.):sp2}, is a correct way to always send a 011+ call to Callwithus.  I ran a test and it works.  The sip 400 content length message is not that common.  Sip 400 is also sometimes called a "Bad Request".

It looks like there is an error somewhere else.

To troubleshoot the problem I would also try dialing your number two additional ways, as **2011xxxxxxxxxxx and also put it in a SpeedDial SP2(011xxxxxxxxxx).  If these methods do or not complete OK that could help pin down the location of your problem.

Navigation

[0] Message Index

[#] Next page

[*] Previous page