Problems with DTMF tones

<< < (3/9) > >>

RonR:
Quote from: LeftRight on April 07, 2011, 06:58:58 pm

Dial # will bypass OBi unit, i.e., NO DTMF detection on the PHONE port and NO regeneration on the LINE port ...

There is DTMF detection (but insufficient evidence to go out on a limb about DTMF regeneration) after dialing '#'.  SYSLOGing clearly shows the DTMF detection going on.

ajayhere24:
I am having a similar issue too. If anyone figures out a solution to it, please do let me know.

thank you,
Ajay

ChrisThompson:
I'm still having the problem.  I haven't yet tested it with the OBi unplugged.

ChrisThompson:
With the OBI110 unplugged, dialing DTMF tones through the Line works just fine.  I really hope this is a software issue and not a hardware issue because I use my phone for conference calls almost every day and really need to be able to dial tones to enter the conference ID number.

infounlim:
Same issue here.

Navigation

[0] Message Index

[#] Next page

[*] Previous page