Setting up obi110 to forward all PSTN calls to obi202

(1/2) > >>

augustin7725:
Hi all I need some assistance for setting up my obi110 to forward all incoming calls on the PSTN port to my obi202.

I have 2 - obi110 each connected to a dedicated PSTN phone line and 1 - obi202 adaptor.

my ideal situation is for the obi110 #1 to call phone port #1 of the obi202 and obi110 #2 to call phone port #2 of the obi202. Auto Attendant function not required, all incoming calls must be forwarded.

thanks,
Augustin

ianobi:
Make the following changes:

OBi110 #1 (200111111) & OBi110 #2 (200222222)

Physical Interfaces > LINE Port > InboundCallRoute:
{ph,pp(ob500123456)}

This will ring the local OBi110 phone and fork the call to the OBi202. Whichever answers first will connect to the incoming call. If you do not wish to ring the OBi110 phone then use:
{pp(ob500123456)}


OBi202 (500123456)

Voice Services > OBiTALK Service > InboundCallRoute:
{(200111111):ph},{(200222222):ph2},{ph,ph2}

augustin7725:
Impressive!!! it works, now I have 2 nights of sleep to make up for  ;)


thanks
Augustin

willmw:
Same scenario, one step further.  I want to make calls on my obi202 default to go out the PSTN port on the obi110.  How would one accomplish that?

azrobert:
OBi110

Voice services -> OBiTalk Service -> InboundCallRoute:
{200222222>(1xxxxxxxxxx|xxxxxxxxxx|xxxxxxx):li},{ph}

OBi202

Physical Interfaces -> Phone Port n

DigitMap:
(1xxxxxxxxxx|xxxxxxxxxx|xxxxxxx|......current rules.........)

OutboundCallRoute:
{(<ob200111111*>(1xxxxxxxxxx|xxxxxxxxxx|xxxxxx)):pp},....current rules.....

200111111 is the OBi number of the OBi110
200222222 is the OBi number of the OBi202
Any 11, 10 or 7 digit number dialed on the OBi202 will be routed out the OBi110's line port.

Navigation

[0] Message Index

[#] Next page