Do I need an additional SP?
noobee:
Here's what I see on my router page.
Uploaded with ImageShack.us
giqcass:
Assuming 192.168.1.102 is your Obi:
External port 5061
Internal Port 5061
Protocol Both
To ip address 102
Enabled X
Application name = Something descriptive like Obi Sp2
noobee:
Thanks for all your help, but it still does not work for me. :(
When I call my callcentric free NY number, I don't hear any ring, no error message, no voicemail, but I can see the incoming call in the call history on callcentric account.
Not sure what could be wrong here!
Another interesting thing is, when I make a single call from my cell, in the Callcentric history I see 2-3 incoming calls from my cell number, at the same time. Is there some congestion issue, or, settings problem?
giqcass:
I would make sure the port forwarding and sip address are all correct. Try calling your obi via sip uri. http://www.flaphone.com/ can be used for this.
Add a contact to flapphone username@your.ip.address:5061 Then call it.
The username part isn't important the Obi will ignore it anyway. You could use any sip program to make the call. The one I suggested is web based and it doesn't require installation. If you get the call then you know it's a callcentric issue. Let me know if it works and we can go from there.
noobee:
Tried calling the same SIP address using Flapphone, but my phone is not ringing.
Here's the port forwarding set up on my router.
Uploaded with ImageShack.us
Navigation
[0] Message Index
[#] Next page
[*] Previous page