Do I need an additional SP?
giqcass:
Type whats my ip in google.
bliw:
Thank You for your suggestions. I'm trying the 2nd option that you gave.
Setup SP2 as Callcentric
Added voice gateway1 as
Enable: <enabled>
Name: Nymgo1
AccessNumber: SP2(ata.nymgo.com)
DigitMap: (xx.)
AuthUserID: <nymgo user id>
AuthPassword: <nymgo password>
Also, on Physical interfaces -> Phone:
PHONE Port
DigitMap: ([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg1)|**9(Mpp)|(Mpli))
OutboundCallRoute: {([1-9]x?*(Mpli)):pp},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg1)):vg1},{(<**9:>(Mpp)):pp},{(Mpli):pli}
I'm thinking I may not have entirely setup the gateway properly. I'm getting a message "Your service provider rejected the call 403" when I dial and international no. like **300xxxxxxxxxxxx
giqcass:
I had to set mine up like this
SP2(ata.nymgo.com;ui=userid:password)
For me the password and user id did not appear to be passed properly till I added them to the string.
Other values can also be added as part of the string like stun.
You could also set up your dial plan so all international calls are routed through nymgo without the **3 code.
noobee:
Quote from: giqcass on April 24, 2013, 04:05:24 pm
Type whats my ip in google.
could not get this to work.
Found out IP address using whats my ip address link.
Added the xyz@<myipaddress>:5060 in the CallCentric Call Treatments section to forward all calls to my OBI via SIP URI.
I cannot get my Obi phone to ring. What am I doing wrong here?
noobee:
Do I need to set up static IP on my Obi? If so, how?
Navigation
[0] Message Index
[#] Next page
[*] Previous page