OBi2182
OBi1022
Poly D230
OBi200
OBi202
OBi212
OBiWiFi5G
January 04, 2022, 08:06:26 am
Welcome,
Guest
. Please
login
or
register
.
News
:
Forum Home
Search
Login
Register
OBiTALK
OBiTALK Community
>
General Support
>
Installation and Set-Up (Devices)
>
receiving incoming calls on SP1, making calls (outbound) on the gateway?
Pages: [
1
]
« previous
next »
Print
Author
Topic: receiving incoming calls on SP1, making calls (outbound) on the gateway? (Read 1417 times)
hgeorges
Newbie
Posts: 14
receiving incoming calls on SP1, making calls (outbound) on the gateway?
«
on:
April 26, 2013, 05:26:22 am »
Hello;
I have an obi100, set with one provider on SP1, no provider yet declared on SP2 (planning to get GV in there) and a 3rd declared in the gateways section.
My question is, if with the current setup (programmed and working as is), instead of dialing **3 to select gv1 for outbound calls, I can declare the gv1 as default for all outgoing calls, except 911, which needs to go on SP1.
(I assume that if I would move gv1 provider into SP2, and declare it default, then it would take care of the outbound calling, but I would still need to address 911 calls routed properly).
Thank you for your help!
hg
Logged
ianobi
Hero Member & Beta Tester
Posts: 1831
Re: receiving incoming calls on SP1, making calls (outbound) on the gateway?
«
Reply #1 on:
April 26, 2013, 06:20:29 am »
This setup should work. It does not need **3 to be dialled. Also, it leaves sp2 free for future use.
Physical Interfaces > PHONE Port > PrimaryLine: SP1 Sevice
Voice Service > Auto Attendant > PrimaryLine: SP1 Service
Physical Interfaces > PHONE Port > DigitMap:
([1-9]x?*(Mpli)|[1-9]S9|[1-9][0-9]S9|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg1)|**9(Mpp)|(Mpli))
Physical Interfaces > PHONE Port > OutboundCallRoute:
{([1-9]x?*(Mpli)):pp},{911:sp1},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg1)):vg1},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Service Providers > ITSP Profile A > General > DigitMap:
(<**3>(Mvg1))
This makes all outgoing calls go via Voice Gateway 1 and does not allow any calls, except 911, to go out via sp1.
911 is treated as a special case and is routed direct to sp1 using this rule {911:sp1} in the OutboundCallRoute.
You might want to consider changing Voice Gateway1 > DigitMap. If you are using the default (xx.) you will find a ten second delay after dialling any number. Matching dialled numbers would be better. Depending on what your voip provider expects to receive, maybe something like:
Voice Services > Gateways and Trunk Groups > Voice Gateway1 > DigitMap:
(1xxxxxxxxxx|<1>[2-9]xxxxxxxxx|<1aaa>[2-9]xxxxxxS4|011xx.|xx.)
Replace aaa with your local code.
Logged
hgeorges
Newbie
Posts: 14
Re: receiving incoming calls on SP1, making calls (outbound) on the gateway?
«
Reply #2 on:
April 26, 2013, 07:51:12 am »
Brilliant! Thank you! I'll test it tonight.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Firmware, Software Updates
-----------------------------
=> Firmware / Advisories / Notifications for OBi Products
-----------------------------
General Support
-----------------------------
=> On-Topic: Obihai and OBi Products
=> Installation and Set-Up (Devices)
=> Day-to-Day Use
=> New to Using the OBi / VoIP
=> OBiTALK Web Portal
=> Feature Requests
-----------------------------
Region Specific Technical / Service Provider Support
-----------------------------
=> North America - Including Google Voice, Skype, etc.
=> Australia, New Zealand and the Pacific Islands
=> Asia (Continent)
=> Europe (Continent) & Africa (Continent)
Loading...