Bria Setup - Thunderbolt Android
slobuds:
So I'd like to give this a shot - hoping for a better softphone than OBiOn, which is giving me sever/unusable echo. The CounterPoint support folks tell me that Thunderbolt is not explicitly supported, however, there are several other HTCs which are and there is a good chance that it will work. Money back if not.
To set up the Bria, I need the following settings:
User Name
Password
Domain
Outbound Proxy
Authorization Name (optional)
GlobalIP - private or public IP published at 'signaling' level.
Single Register - only needed if GlobalIP is 'on'
SIP Transport - UDP or TCP or TLS.
Audio Encription
SIP Regristration Refresh interval in seconds - from 30 to 900
Help with these settings would be appreciated. Thanks.
Martin
QBZappy:
slobuds,
Everything you need to know how to setup is in this thread:
http://www.obitalk.com/forum/index.php?topic=40.0
slobuds:
Thanks!
slobuds:
Quote from: QBZappy on April 05, 2011, 11:50:48 am
slobuds,
Everything you need to know how to setup is in this thread:
http://www.obitalk.com/forum/index.php?topic=40.0
Thanks again for the info Zappy, but the settings in these threads are greatly different from the settings for the Bria. My installation is failing after several tries.
One thing I see with the Bria, without even succeeding with a log-in, is that Bria picks up my contacts off the Thunderbolt - big big plus.
Do you have any other ideas on how I can get the rest of the settings?
Thank you,
Martin
RonR:
I believe the thread QBZappy pointed you toward is for configuring a PC-based softphone like X-Lite to work with the Obihai middle-ware client that has the information you're looking for hard-coded into it. That thread wasn't for a smartphone-based SIP client.
I don't believe the information you're looking for has ever been disclosed by Obihai.
Navigation
[0] Message Index
[#] Next page