Urgent Dial Plan Assistance Needed

(1/4) > >>

Kings:
Hi guys, I need some assistance with outgoing dial plan configuration. I just got my OBi110 device and I have been able to setup my Google Voice account on SP1 as (Default), and my Localphone VoIP account on SP2 and both registered successfully.

Now the problem I am facing is how to setup the device to use Google Voice for all US and Canada bound calls only, and then strictly use my Localphone Voip account on SP2 for all other International bound calls.

I will so much appreciate it if someone can kindly guide me on how to setup the correct dial-plan and what it should look like, (that is to use Localphone strictly for outgoing Intl. calls) to reflect the above. Thanking you in advance for your anticipated kind assistance.

Regards,
Kings

N7AS:
Try this by adding to the begining of Physical Interfaces -> PHONE Port -> OutboundCallRoute: {(00|011xx.):sp2},

Kings:
Thanks a lot mate for your prompt response, I have tried your recommendation but it did not work, I can't still successfully make outgoing International calls from my SP2 which has Localphone. Below is what I have at the OutboundCallRoute, following your suggestion:

{(00|011xx.):sp2}{([1-9]x?*(Mpli)):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

Can you kindly look at it and let me know what I did not do right.

Thanks.

RFord:
You are missing a comma between the first two items:

{(00|011xx.):sp2}{([1-9]x?*(Mpli)):pp}  should be  {(00|011xx.):sp2},{([1-9]x?*(Mpli)):pp},......

hwittenb:
For international numbers starting with either 00 or 011 I believe you would have something like this
{((00|011)xx.):sp2},{([1-9]x?*(Mpli)):pp},......

Navigation

[0] Message Index

[#] Next page