Phone hangup when I'm talking
CoalMinerRetired:
I'll be interested to hear how this turns out.
And a point of clarification on the log showing which terminal caused the call to end. That is not absolute, in most cases it shows correct. I had a unrepeatable, unpredictable issue where the logs showed the one and only analog phone (on an Obi202) was causing the call end. But clearly that was not the case, the device itself was flaking out, becoming unresponsive and a call would mysteriously drop, bit it was logged as the analog phone ended the call. An FYI, thought about this after I posting it.
infin8loop:
Go to Physical Interfaces - Line Port and change SilenceTimeThreshold to 600 or more. The default of 60 will allow you to talk for a minute straight with no response from the other side and you will be disconnected. This bit me early on when the wife talks non-stop to her sister and the call would drop... leading her to assume the Obi was a POS. At 600 she's bound to take a breath before passing out, allowing her sister to get a word in edgewise. If you have to drone on for more than 10 minutes at a time, make it greater than 600. ;D
Rick:
Sometimes on business calls this has happened. I just changed mine to 600 also.
CoalMinerRetired:
Interesting. I regularly dial in to conference calls and listen in without speaking for an hour at a time and I don't see this behavior.
Footnote: I was getting mystery reboots in the middle of calls, but that seems to have been solved. Do you happen to have CallCentric setup on any of your SPs?
Navigation
[0] Message Index
[*] Previous page