Obi100 Problem DHCP & Static IP Logon

(1/2) > >>

lhm.:
I have tried both DHCP Factory default settings and set to static ip address and Obi100 box will not show on lan. Green power botton continues to blink searching for ip address. I have 4 pcs, 2 sip enabled smartphones and a PAP2 that all show on the lan when using DHCP or when set with static ips and function/work properly. What can I be missing? Any help is appreciated.

RonR:
Is the OBi connected to a gigabit LAN?  There have been a couple of reports of issues in this environment.  One user found that using a shorter ethernet cable eliminated the problem.

lhm.:
No, 100 mbits lan. I tried the new short cat5 Obi cable, no joy.

RonR:
Does the OBi get an IP address connected directly to your Cable/DSL modem, assuming the modem is running DHCP on its LAN port?  You will probably need to reboot the modem and OBi after making the connection.

lhm.:
Direct connect to cable modem made the power light show solid green. Now what, should I update firmware?

Navigation

[0] Message Index

[#] Next page