Help: How to add number before dial
ianobi:
orangelau,
Can you look in Call History and see what is dialled and what goes out on sp1?
Does your voip provider on sp1 accept thirteen digit numbers starting with 777?
orangelau:
Where can I find the call history?
ianobi:
To get the ip address dial ***1. It will be something like 192.168.x.xx
Put the address in your browser. Default User name is "admin", default password is "admin".
Another way to see what is going on is to go into OBi expert pages: Status > Call Status while the call is ongoing and see what is in both Peer Number slots.
orangelau:
Quote from: ianobi on May 16, 2013, 10:13:05 am
To get the ip address dial ***1. It will be something like 192.168.x.xx
Put the address in your browser. Default User name is "admin", default password is "admin".
Another way to see what is going on is to go into OBi expert pages: Status > Call Status while the call is ongoing and see what is in both Peer Number slots.
I found and entered the page, but there is nothing inside.
ianobi:
orangelau,
I set up my OBi110 with the rules I gave in Reply #1. I dialled 1122334455. This is what my Call History shows:
Call 1 05/17/2013 13:44:22
Terminal ID PHONE1 SP1
Peer Name
Peer Number **17771122334455 7771122334455
Direction Outbound Outbound
13:44:22 New Call
13:44:22 End Call (404 User not found)
Under PHONE1 it shows that **1777 has been prepended to 1122334455.
Under SP1 it shows that **1 has been removed and 7771122334455 has been sent out to sp1.
All works as it should. (The call was rejected because thirteen digits is not recognised by my provider on sp1.)
Can you confirm that this is true in your OBi110:
Physical Interfaces > PHONE Port > PrimaryLine: PSTN Line
I'm not sure what else to suggest. It may be that you have some strange rules somewhere that have stopped this working for you.
Navigation
[0] Message Index
[#] Next page
[*] Previous page