How do I require choosing an outbound line?

[TheNatural]

I have two google voice accounts configured on my OBi100 and I did not check "Make This the Primary Line to Call Out from" on either of them in the OBi dashboard.  However, if I just pick up the phone and dial a number, it automatically uses sp1 to dial out.  I would like it to be required to push **1 or **2 to choose one of the accounts before dialing a phone number to get out. Is this possible?

[giqcass]

The best solution I can think of would be to change your dial plan so calls are routed to a voice gateway you have not set up like VG1.  Then all calls made without selecting an account would fail.

[TheNatural]

Thanks.  Can you be more detailed? Where is the dial plan setting?

[azrobert]

In Physical Interfaces -> Phone Port -> OutboundCallRoute
Remove rule ,{(Mpli):pli}
This should be the last rule in the OutboundCallRoute
This defines the Primary Line.
When the default Phone Port Primary Line is SP1 the above rule is equivalent to {(Msp1):sp1}