Modification and Gateway usage question.

<< < (2/4) > >>

RonR:
Did you add the additional rules (or at least the **6 rules) to the PHONE Port DigitMAP and OutboundCallRoute?

neftv:
Yes I believe so. I inserted the extra parameters. This is what I have
Digimap
([1-9]x?*(Mpli)|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**4(Mvg4)|**6(Mvg6)|**7(Mvg7)|**8(Mli)|**9(Mpp)|(Mpli))
Outbound call route
{([1-9]x?*(Mpli)):pp},{911:sp1},{(<#:>):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1}, {(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**4:>(Mvg4)):vg4},{(<**6:>(Mvg6)):vg6},{(<**7:>(Mvg7)):vg7},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}

RonR:
Look right at first glance.

And Voice Gateway6 is configured?:

Name : Sip Broker
AccessNumber : SPx(sipbroker.com)
DigitMap : (<*>[x*][x*].|*[x*][x*].)

where SPx is SP1 or SP2 where you have a VoIP provider configured.


Sip Broker is alive and well working here.

neftv:
Ok I am making some headway here.
I forgot put SPx as SP1 where my domestic provider is.

Now when I dial **6 011 188888  I get silence then it hangs up after a few seconds and goes back to dial tone.

I decided to put my smartvoip provider in position 4 and that worked.  

Don't know if I was suppose to get a welcome message on SIP broker as I thought I would.

update...
I moved Pennytel to position 3 and that works they have a echo test.  

I guess I am on my way.
 I not sure why I don't receive back from Sipbroker.

RonR:
You were probably getting one-way audio on the **6 011 188888 call.  The current implementation of SIP calling through Voice Gateways isn't as robust as it could be when it comes to the audio (RTP) side of things.

Navigation

[0] Message Index

[#] Next page

[*] Previous page