OBiApps to use OBi110 as voice gateway
ckleea:
There is an option under the web portal that Obiapps can assign a OBi110 as voice gateway.
Speed dial + * + tel number allows me to dial out via the OBi110 device.
However, I notice that it is always go through SP1 i.e. my google voice account. Is it possible to allow me to go through PSTN or SP2?
jimates:
For an app you can set an Obi as the default gateway so that you only have to dial the 10 digit number, not the speed dial designation. This is called single stage dialing.
the speed dial + * is for direct dialing from one Obi through another (but it can be used from the app also).
Single stage & direct dial always goes through the default line. If you want to use a different line all the time for your direct dialed calls you can set that in the Obitalk InboundCallRoute.
You will have to go through the AA if you want options on which line to use instead of the default.
ckleea:
Could you give me an example to change the inbound rule so that I can dial via SP2 or PSTN?
jimates:
Once you set the Obi as the default gateway for your softphone app at the dashboard, your
Voice Service > Obitalk Service > InboundCallRoute should look similar to this
{(290xxxxxx)>(xx.):SP1},{(290xxxxxx):aa},{ph}
{(290xxxxxx)>(xx.):SP1} is the part of the rule directing single stage dialed calls from your app
SP1 represents the line for the outgoing call. change it to sp2 or li depending on which line you want the call to go out on.
Basically it says,
1 - calls coming in from 290xxxxxx along with 2 or more digits are routed as an outbound call through SP1
2 - calls coming in from 290xxxxxx with no other digits are directed to the AA
3 - calls coming in from other numbers are routed to the phone port
RonR:
I haven't actually tried this, but you should be able to do some fairly fancy things with the OBiTALK Service InboundCallRoute. For example:
{(200123456|200654321)>(1xxxxxxxxxx):li},{(200123456|200654321)>(011xx.):sp2},{aa}
This should allow OBiTALK callers 200123456 and 200654321 to make direct calls, with US/Canada calls being directed to the LINE Port and international calls being directed to the SP2 Service. All others would be sent to the Auto Attendant, where they could make 2-stage calls, including calls to your OBi telephone by dialing 0 (use PIN protection to ensure only authorized users can make calls through the Auto Attendant).
Navigation
[0] Message Index
[#] Next page