how to restrict access to single(out of 3) obi device to my trusted circle

[dotcomsourcing]

i have 3 devices registered in my obitalk account. I have added 3 other people(obitalk accounts) to my trusted circle. Of these people, i want to give acces to 1 device to 1 person, 2 devices to another person and all device access to 1 person for making outbound calls through my obitalk account using their own soft phones and their own obitalk accounts on their pc's.

i am unable to limit access to these people through specific devices in my account. as they have access to all my obi devices.

Please advice.

[Shale]

One thing that comes to mind is to create 3 different OBiTalk accounts, and delete some devices from the existing account.

Alternatively, I think you could modify the X_InboundCallRoute for each SP of each device. I am not sure how to cause OBiTalk to not override your change, but I think that will not be a problem if you modify each X_InboundCallRoute for each SP for each device.

The multiple OBiTalk accounts may be acceptable to you, but it is not the only way.

[azrobert]

First my disclaimer:
I have never used the Circle of Trust, so this is how I think it works.

When you added the 3 OBiApps to your Cycle of Trust the 3 OBi's were updated with something like the following to route the caller to the Auto Attendant:

Voice Services -> OBiTALK Service -> InboundCallRoute:
{(290111111|290222222|290333333:aa}

Leave OBi#1 unchanged

Manually change OBi#2 to:
{(290111111|290222222):aa},{(290333333):}

Manually change OBi#3 to:
{(290111111):aa},{(290222222|290333333):}

I don't know if OBiTalk will restore the original configuration after you make the changes.