No Called ID and no Voicemail notification while using obi100 and GV
CoalMinerRetired:
I reread your original post above, let's clarify a few points,
201-555-1212 - This is the "Caller ID" field.
DOMINOS PIZZA - This is the "CNAM" (Caller Name) Field.
Via an Obi, GV only supplies the Caller ID field, never the CNAM field. So you will always see a blank or something like "Unknown Name' or whatever in the CNAM field.
Back to your original question. If the Obi Call History is showing a number for the Caller ID field, then your phone (between the first and second ring) should be showing the same thing. If this is not the case, then determine why, ... is phone set to NA (North America) ring/caller ID standards, have you changed any Obi ring or caller ID settings away from NA standards (defaults), is your Obi a NA model, etc.?
P.S:, For the record, there is a workaround to get CNAM with GV on an Obi, you use a second SP slot, forward incoming GV calls to it, it adds CNAM, explained here.
kow613:
The phone is not even showing Caller ID.
The phone is set to NA ring/caller ID standards.
How could I tell if my Obi is a NA model? I bought it on Amazon...
What can I look at to determine what the issue between my Obi and my phone might be?
The VM notification is also not showing, could something be causing both to happen?
CoalMinerRetired:
Check the original shipping box, a label will have either NA, EU or UK checked.
> The VM notification is also not showing, could something be causing both to happen?
Yes. It's either your phone, or your Obi. Do a few simple tests to eliminate one or the other:
Take the phone and plug it into a landline where you know Caller ID works, does it show Caller ID correctly? Use the same phone cord for this test that you use to plug the phone into the Obi port.
Conversely, use (borrow) a phone for which you know Caller ID works, plug it into the Obi and see if it shows Caller ID. Eliminate one of the other then look at possibilities from there.
Navigation
[0] Message Index
[*] Previous page