Five services on one OBi202 or how to split between two devices?

<< < (3/3)

sir_rob:
Thank you all for your help!  I will try out your suggestions.  I also just ordered a second unit for a business phone and fax line.  Hopefully having more than one unit on a network does not cause any problems.

Again, thank you for your help!

sir_rob:
I have made the modifications that you mentioned.  Here is what I did:

SP1- GV Account 1 outbound only (line 1)
SP2- CC Inbound only - for CNAM or Caller ID with name (line 1)
SP3- GV Account 2 inbound and outbound currently (line 2)
SP4- CC Inbound only - for CNAM or Caller ID with name (line 2)

Voice Services -> Gateways and Trunks Groups -> Voice Gateway 1
Name: Anveo 911
Access Number: Access Number: sp2(sip.anveo.com:5010)
DigitMap: (911|933)
AuthUserID: xxxxx
AuthPassword: xxxxx

Phone Port Outbound Call Route I had: {911:sp3},{933:sp3}

I changed it to: {(Mvg1):vg1}

Now 911 works from line 1 but not line 2.  I will see if I can fix that.  Also, Anveo sent an email notification that the SIP connection was lost.  I guess that I will lose that notification with this configuration unless anyone has any ideas.

sir_rob:
Just changed the following and now line 2 can also call 911:

Interfaces -> PHONE 2 -> OutboundCallRoute
Add {(Mvg1):vg1},

Now the only thing missing is the SIP online/offline notification from Anveo.  This is not that big of a deal, and I do not see a way to get it functioning, but it was nice to know if my phone line ever went out for any reason.

Navigation

[0] Message Index

[*] Previous page