can obi100 have more than 2 lines?

(1/2) > >>

heny:
in obi100 setup page, I only see two SP: sp1 and sp2.

Is it possible to setup more SP as backup? If so could anyone point me some setup help links?

thanks!

azrobert:
If one of your SP trunks is defined as SIP you can define up to 8 more outbound only trunks via Voice Gateways.

heny:
Quote from: azrobert on June 24, 2013, 07:23:59 pm

If one of your SP trunks is defined as SIP you can define up to 8 more outbound only trunks via Voice Gateways.


SP1 is gv, SP2 is configured to use nonoh.net(I think it is SIP?)

for additional line, I need outbound only. Is there any guide to set that up?

I found the obi really lacking good user guide. the admin guide http://obihai.com/OBiAdminGuide.htm is not good to new users.

azrobert:
It's very easy to define a trunk on a Voice Gateway. The harder part is setting up call routing.

This is how to setup Callcentric on a VG:

Voice Services -> Gateways and Trunk Groups -> Voice Gateway1
Name: Callcentric
AccessNumber: sp2(callcentric.com)
AuthUserID: 17771234567
AuthPasssword: password

You can test the VG trunk by defining a Speed Dial like this:

vg1(18005551212)

If you get this to work post back here with your requirements for routing. Like the type of phone numbers you will be routing to the VG (international or domestic). Are you currently using **2 to route numbers to SP2?

The VG does not register to your provider and some providers require registration, so this might not work.

heny:
Thanks! I also found this post very helpful: http://www.obitalk.com/forum/index.php?topic=526.0

I don't have special requirements for routing, I want to use this as backup voip in case my voip in SP2 is down. I will be using ***3xxx to dial.

Navigation

[0] Message Index

[#] Next page