Using CSipSimple With OBi – Direct Calling Method - Version 1
GregoryZ:
I created a new account in CSipSimple, using a built in wizard. Then tested it.
I call the number, and hear a Beep. Then I get nothin'.
So, I'm guessing it FAILED! >:(
So, let me work on that issue, and see where it takes me.
Thanks for getting my head in a "Basic Starting Point" direction. ;D
-G
ianobi:
I think "beep" is normal for 4444. Just talk after the beep it should echo back.
GregoryZ:
LOL!
Yeah, I figured it was normal. But, no Echo.
I quickly set up an old Sipgate account. I get the Echo back on that system.
I tested two of my CC accounts, and I get two way audio on them too.
Just not on Sip2Sip.
I'm still working on it.
ianobi:
I think there’s a danger of confusion here for anyone reading this (including me) about what we are trying to do. There are two methods here:
Direct: CSipSimple > OBi
This is dealt with in this thread.
Indirect : CSipSimple > sip2sip > OBi
This is dealt with in thread http://www.obitalk.com/forum/index.php?topic=4647.msg30415#msg30415
GregoryZ:
Ok.
For those who are following this ....
I've got the calls routing the way they should, using this Direct Method.
However, the voice quality is giving me fits! I had it set up where I was getting One Way Audio, when calling from the Android, to another phone. But tests today, there is no Audio at all.
I'm thinking that it is more of a Codec problem now. I'm sure I have all of the required ports forwarded on my Router to my OBi100.
CSipSimple Ver: 1.01.00 r2272
CSipSimple does not have the standard G711a. I believe I read on the website's change log something about PCMU was it's equal.
For those of you who have this working correctly, can you tell me what Codec(s) you have set up in CSipSimple, and the order you have them.
As a note, I installed CC's app, and called my CC number direct from my Android phone. I was getting only One way Audio then too. ???
-G
Navigation
[0] Message Index
[#] Next page
[*] Previous page