Calling across to Countries?

[Saurav]

Tried to read the forum but seem stuck at some points so figured i would ask for advice.

Here is my setup

Obi - 1 ob1111111 (ctry A) + Local PSTN A + Phone 1
Obi - 2 ob2222222 (Ctry B) + Local PSTN B + Phone 2


What I want to achieve

1)  If any one calls local PSTN B it should route the call to over obi to a specific number and dial out via PSTN A

2) Using Phone 1 or Phone 2 I should be able to use speed dial for the other obi device and Call out using a PSTN - Have done this using
 Voice Services -> OBiTALK Service -> InboundCallRoute : {Obi 1>(Mli):li},{ph}

3) If Phone 4444444 calls the PSTN A, it should use auto attendant to dial out any number on PSTN B

Thanks in advance

[azrobert]

I didn't test the following.

In OBi#1
Add to the beginning of Voice Services -> ObiTalk Service Service ->  InboundCallRoute:
{(200222222)>(200):li(18005551212)},

Replace your Physical Interfaces -> Line Port -> InboundCallRoute:
{(4444444):PP(ob200222222*100)},{ph}

In OBi#2
Add to the beginning of Voice Services -> ObiTalk Service Service ->  InboundCallRoute:
{(200111111)>(100):aa},

Replace your Physical Interfaces -> Line Port -> InboundCallRoute:
PP(ob200111111*200)

Update:
I corrected a coding error at 11:23 PM